Night Magic Blades
KoK NIGHT MAGIC BLADES 325 mm
Features
- They are able to draw picture in range from 50 to 3500 RPM (revolutions per minute)
- The capacity of the blade memory is up to 240 graphic images.
- The rotor blades do not require any special additional connection wiring or any electronic upgrade
- The synchronization, controlling, power and lighting electronic are already inserted inside of the blade
- The rotor blades are comprised of 32 bright LEDs (pure red on the upside, pure green on downside and one white LED at the end of the blade for marginal circle light)
Blades are supplied in the kit, which includes
- Balanced rotor blades where in each blade are 32LEDs and 120mAh LiPo battery. Blades are made with hole 3 mm and 4.5 mm root size.
- Synchronization IR LED transmitter
- Programming USB dongle with charger USB charger
- USB to Mini USB cable
- Jumpers for turning blades on
- Plastic fastening tie
- Operating instructions for rotor blades
Installation and use of KoK NIGHT MAGIC BLADES 325 mm is very user friendly. Just mount blades in a standard way to your helicopter and attach sync LED IR transmitter on the tail pipe of your model by plastic fastening strip. IR transmitter is supplied with a standard connector JST.
This transmitter can be connected to power source in range of 3.3 – 15V. Place the IR LED transmitter direct to second LED of the blade (counting from root, approximately 135 mm from the center of the rotor). The synchronization sensor is built in to bottom side of the blades.
To turn on blades, just put attached jumpers to the first two pin connector counting form root. After turning the blades on, the position end LED will light. Then all LED will gradually light on through the blade from root to end. Because the blades are factory supplied with example images recorded in the memory blade, the entire installation of your new blade will not take more than two minutes and you can fly.
Now you have no obstacles in the fact you can make your first flight with KoK NIGHT MAGIC BLADES.
More detailed instructions for programming images, or texts, and use of KoK NIGHT MAGIC BLADES is in the enclosed instructions, which are an integral part of the delivery product.
KoK NIGHT MAGIC BLADES 600mm and 710mm
Features
- Night magic blades are made in various lengths: 600 mm, 620 mm, 690 mm and 710 mm
- They are able to draw picture in range from 50 to 2000 RPM (revolutions per minute)
- The capacity of the blade memory is up to 240 graphic images.
- The rotor blades do not require any special additional connection wiring or any electronic upgrade
- The synchronization, controlling, power and lighting electronic are already inserted inside of the blade
- The rotor blades are comprised of 64 bright LEDs (pure red on the upside, pure green on downside and one white LED at the end of the blade for marginal circle light)
The basic package of the rotor blades includes one pair of blades in the lengths of 600 mm, 620 mm, 690 mm or 710 mm, one infrared transmitter IRT2, communication and charger Dongle v0.33, USB cable, and two turning on jumpers.
More information go to Download section
Show Night Magic Blades in the video gallery
